Hyundai Wia | LV8500R/L | High Performance Vertical Turning Center
Have one to sell?
ConditionNew
New
The HYUNDAI WIA LV8500R/L (RM/RL) series of Vertical Turning Center features a Box Type Column. This single piece, square type column offers the ultimate stability by absorbing vibration and eliminating twist. This combination delivers superior precision even during heavy cutting. Also available in a milling configuration having live tooling and C axis: Live Tooling (M)
■ SPECIFICATIONS [LV800RM/LM]
CAPACITY:
Swing Over the Bed Ø35.0” (Ø890mm)
Swing Over the Carriage Ø28.0” (Ø710mm)
Max. Turning Dia. Ø31.5” (Ø800mm)
Max. Turning Length 31.5” (800mm)
SPINDLE:
Chuck Size 18”
Spindle Bore Ø3.9” (Ø100mm)
Spindle Speed (rpm) 2,000rpm
Motor (30min) 50Hp (37kW)_US STD.
[40Hp (30kW)_LV800R/LM]
Torque (30min) 1,932 lbf.ft (2,619 N.m)_US STD.
[2,115 lbf.ft (2,868 N.m)_High Torque opt.]
1,194 lbf.ft (1,619 N.m) LV800R/LM
Spindle Type Gear Box [Belt opt - LV800R/LM]
Spindle Nose A2-11 / A2-15 (High Torque_opt.)
TRAVEL:
X / Z axis travel 17.3” / 31.5” (440 / 800mm)
X / Z axis rapid travel 787 / 787 IPM (20 / 20 m/min)
X / Z axis ball screw diameter Ø1.97” / Ø1.97” (Ø50 / Ø50mm)
X / Z axis guideway span 16.93” / 25.59" (430 / 650mm)
Slide Type Box Guide
TURRET:
No. of Tool 12ea
Tool Size OD:1.3” (32mm) / ID: Ø2.5” (Ø63mm)
Indexing Time (1 step) 0.2 sec
Turret clamping force 24,725 lbs (11,215kgf)
ROTATING TOOLS [LV800R/LM]:
Tool type BMT 75P
Rotating tool RPM 3,000 RPM
Rotating tool spindle motor (30min) 10 HP (7.5 kW)
Rotating tool torque (30min) 35.3 lbf.ft
Rotating tool collet type ER40
TANK CAPACITY:
Coolant Tank 90 gal (340 liter)
Lubricating Tank 0.5 gal (2 liter)
Hydraulic Tank 6.3 gal (24 liter)
MACHINE
Machine Height 131.9” (3,350 mm)
Floor Space (L) 77.8” (1,975 mm)
Floor Space (W) with rear chip conveyor & tank 172.0” (4,370 mm)
Machine weight 24,251 lbs (11,000kg)
Electric Power Supply 33 kVA @ 220V [37kVA]
Voltage required 205 - 235 Volts / 3 Phase
Specifications are subject to change for improvement without notice.
■ FEATURES [LV800RM/LM]
• Fanuc 32i-B Control
• Fanuc Alpha spindle drive and Alpha X / Z servo motors
• Ø31.5” (Ø800mm) Max. turning diameter
• 31.5” (800mm) turning length
• Powerful 50Hp (37kW) spindle motor (30min)
• Spindle Torque 1,932 lbs.ft (2,619 N.m) at 177 RPM
• 18” 3-jaw chuck / Max. 2,000 RPM Spindle
• A2-11 Spindle nose
• Gear box attached spindle motor + belt
• High torque spindle for 24” chuck (opt.)
Power: 50 HP (37kW) (30min)
Torque: 2115.3 lbf.ft (2,868 N.m) at 177 RPM
RPM: Max. 2,000
A2-15 spindle nose
• Mill Turret spindle [LV800RM/LM]
Power: 40 HP (30kW) spindle motor (30min)
Torque: 1,194 lbf.ft (1,619 N.m) at 177 RPM
Belt Dirven type
• Live Tool: 3,000 rpm [LV800RM/LM]
10 HP (30min) / 35.3 lbf.ft torque at 1,500 rpm
• Travel (X/Z): 17.3” / 31.5” (440 / 800 mm)
• Rapid speed: 787 IPM (20m/min) X and Z axis
• Box guideways
• Manual Tool setter (Attachable)
• Tool size: □1.3” / Ø2.5” (□32mm / Ø63mm)
• 87 PSI coolant system [290 PSI_Opt.]
• Double Pre-Tensioned Ball screws
• Chip Conveyor (48” discharge height)
• 1 color tower signal light
• Full enclosure splash guard
We use cookies to improve your experience. Privacy Policy.