Hyundai Wia L4000 15" Chuck Box Way Heavy Duty Geared Spindle Turning Center
Have one to sell?
ConditionNew
New
The L4000 features a 45° slant bed design which is developed using finite element analysis (FEA) to absorb vibration and minimize thermal growth, ensures a stable platform for powerful precise cutting capabilities. Box guideways offer improved rigidity due to the increase surface contact with the guideway and can applicable for a variety of applications.
CAPACITY:
Swing over bed Ø31.5"
Swing over carriage Ø31.5"
Max. turning diameter Ø22.4"
Max. turning length 41.4"
Bar Capacity Ø4.6"
SPINDLE:
Chuck size 15"
Spindle bore 5.1"
Spindle speed 2,000 rpm
Spindle nose A1-11
A.C. Spindle Motor (max) 47 HP
Max. spindle torque (Max) 1,807 lbf.ft
TRAVEL:
X / Z axis travel 13.0" / 43.5"
X / Z axis rapid traverse rate 630 / 787 IPM
X / Z axis ball screw diameter Ø1.57" / Ø1.57"
X / Z axis guideway span 12.1" / 15.7"
TURRET:
Number of tools 12
Turning tool shank size 1-1/4"
Boring bar holder diameter Ø2-1/4"
Turret index time (1 step) 0.25 sec
Turret clamping force 27,428 lbf (12,441 kgf)
Live Tool Motor Power / Torque (S3 25%) NA
Live Tool Speed NA
TAIL STOCK (Programmable, non-Built-in Type):
Tailstock quill diameter Ø4.7"
Tailstock quill stroke 4.7"
Tailstock body stroke 39.4"
Tailstock spindle taper MT #6, Live
Max. tailstock quill thrust 3,880 lbf (
COOLANT and HYDRAULIC SYSTEM:
Coolant tank capacity 83.2 gal
Hydraulic tank capacity and required oil 11.9 gal / VG32 or CB32
Lubrication tank capacity and required oil1.1 gal / G68
GENERAL:
Machine Height 85.6"
Floor Space (L) with side chip conveyor 185.9"
Floor Space (W) 83.5"
Machine weight 16,637 lbs
Power required 32 kVA / amp @ 220V
Voltage required 205 - 235 Volts / 3 Phase
Specifications are subject to change for improvement without notice
Hyundai Wia Fanuc i series - Smart Plus controller
Fanuc Alpha spindle drive and Alpha X / Z servo motors
Ø22.4" Max. turning diameter
41.4" turning length
Ø4.6" Bar capacity
Powerful 47 HP spindle motor
Spindle Torque 1,812.2 lbf.ft at 143.8 rpm
15" 3-jaw chuck
Max. 2,000 RPM spindle
A1-11 spindle nose
2-Step Gear box attached spindle motor + Belt
Solid box way construction
630 IPM (16m/min) X and 787 IPM (20m/min) Z axis rapid speed
Auto Tool setter
12 station turret
Tool size: □1-1/4" / Ø2-1/4"
Programmable MT#6 non-Built-in tail stock (Tow-along type) [MT#5 Built-in_Opt.]
87 PSI coolant system [290 PSI_Opt.]
Chip Conveyor (47" discharge height)
Double Pre-Tensioned Ball screws
Separate coolant tank
3 color tower signal light
Full enclosure splash guard
We use cookies to improve your experience. Privacy Policy.