HYUNDAI WIA | KF5600II | 8000 RPM | VERTICAL MACHINING CENTER

Standard [Optional]

TRAVEL:
X / Y axis travel 43.3” / 22.0" (1,100 / 560mm)
Z axis travel 20.5” (520mm) [Optional 25.0” (635mm) Ext. Z Travel]
Table top to spindle nose 5.9” ~ 26.4” (150 ~ 670mm)
[5.9” ~ 30.9” (150 ~ 785mm) with Ext Z Option]
Column to spindle center 25” (635mm)

TABLE:
Table size 49.2" x 22.0" (1,250 x 560mm)
Allowable load 2,205 lbs (1,000 kg)
Table T slot spacing x width (5) x 3.93” x 0.71” (100 x 18mm)

SPINDLE:
Spindle Speed 8,000 rpm (10K, 12K, 15K & 20K Options)
Spindle Taper BCV # 40
Pull Stud (Retention Knob) 45°
A.C. spindle motor (30min) 20 HP (Beta); (Optional High Torque Alpha Motor)
Spindle torque (30 min) 87 ft-lbs (Optional High Torque Alpha Motor Delivers 210 ft-lbs)

AUTOMATIC TOOL CHANGER:
Number of Tools 30
Tool Shank BCV # 40
Max. Tool Dia. Ø3.1" (Ø80mm)
with empty adjacent pockets Ø4.9" (Ø125mm)
Max. Tool Length 11.8" (300mm)
Max. Tool Weight 17.6 lbs (8 kg)
Tool change time (tool to tool) 1.3 sec
Tool change time (chip to chip) 3.2 sec [3.5 sec]

MOTION:
X / Y / Z axis rapid traverse rate 1,417 / 1,417 / 1,181 IPM (36 / 36 / 30m/min)
[1,645 / 1,654 / 1,654 IPM (42/42/36m/min)_Opt.]
Max. Cutting Feed 374 IPM (10,000 mm/min)
Least command increment .0001" (.001mm)

COOLANT and HYDRAULIC SYSTEM:
Coolant tank capacity 96.4 gal (365 liter)
Hydraulic tank capacity and required oil - (Booster Cylinder)
Lubrication tank capacity and required oil 1.1 gal (4 liter) / G68

GENERAL:
Machine Height 119.2“ (3,028 mm) [135.6“ (3,443 mm)]
Floor Space (L) with side chip conveyor & tank 153.7” (3,905 mm)
Floor Space (W) with control panel 92.2” (2,341 mm)
Machine weight 14,330 lbs (6,500 kg) [16,645 lbs (7,550 kg)]
Power required 20.3 kVA / 54 amp @ 220V
Voltage required 205 - 235 Volts / 3 Phase

Specifications are subject to change for improvement without notice.