Sold

Ganesh Cyclone 32CS 7 - Axis TWIN-SPINDLE MILL / TURN CENTER WITH “Y” Axis & DUAL “C” AXIS

Multi-Axis CNC Lathes
Manufacturer:
GANESH
Model:
CYCLONE 32CS
Condition:
Used - Good
Year:
2014
Serial #:
CB031013
7 - Axis TWIN-SPINDLE MILL / TURN CENTER WITH “Y” Axis & DUAL “C” AXIS
BAR CAPACITY1.25"
TURNING LENGTH95.28"
RPM6,000 RPM
SUB-SPINDLEYes
ControlCNC (Super 900T CNC Control)

GENTURN-32 CS MACHINE SPECIFICATIONS

Main Spindle:

Maximum RPM / spindle bearing 6,000 RPM / 5-bearing spindle, 3-front, 2-rear
Spindle Motor 10-HP 3,000 rpm spindle motor, 2:1 pulley ratio
Collet Nose Brown & Sharpe #22 or Traub A-32
Drawtube Bore 1.456”
Maximum Barstock Diameter 1.25” standard 1.375” with adapter
X-axis Travel 7.28”
Y-axis Travel (true Y-axis, not compound Y) 19.29”
Z-axis Travel 6.50”
Rapid Travel Speed: X, Y, Z 1,181 IPM
Minimum input unit 40 millionths (0.00004”)
OD Turning Tool Positions 6 OD Tools (½” or 12mm) (5-5/8” tool plate available)
ID Turning Tool Positions 5 ID Tools
OD Turning Tool size ½” or 12mm (5/8” or 16mm Optional)
ID Turning Tool Bore Size 25 mm
Spindle Center Height 40” (1015mm)

Sub Spindle:

Sub spindle RPM / spindle bearing 6,000 RPM / 4-bearing Quad-Duplex pair configuration
Sub spindle Motor 5-HP 3,000 rpm spindle motor, 2:1 pulley ratio
Collet Nose Brown & Sharpe #22 or Traub A-32
Maximum Barstock Diameter 1.250” in collet chuck (1.080” pass thru)
X-axis Travel 11.53”
Z-axis Travel 11.61”
Minimum input unit 0.0001”
ID Turning Tool Bore Size 25mm
Air Blast nozzle Included
Finished Parts Ejector Included, along with parts catcher & parts conveyor belt

Live Tooling: All live tools are gear driven w/ ø42mm bearings – no belts!

Cross slide live tools 4-ER-20 cross slide live tools, 4,000 rpm, 2.0 HP (1.5kw)
Front slide live tools 3-ER-20 front slide live tools, 4,000 rpm, 1.0 HP (0.75kw)
Live tool collet size ER-20 collet, Ø1/2” tool shank capacity
Max RPM for live tools 4,000 RPM
(1 cross live tool can be substituted on subspindle tool block)
Machine Dimensions:

Machine Length 101” * ( * +36” for chip conveyor)
Machine Depth 68”
Machine Height 80”
Machine Weight 8,000lbs
Coolant Pump Dual 50psi 3/4-HP Coolant Pumps for main and subspindle
Coolant Tank Capacity 80-gallon coolant tank, with coolant flow confirmation sensor
Lubrication distribution Way lube distributed at 3-6 cc / 15-minute cycle
Machine Power Requirements 220vac ±5%, 63-amps, 3-phase, 60Hz
Air Requirements 85-PSI at 10-CFM for parts catcher, parts ejector, & air blast

SPECIFICATIONS ARE ESTIMATES. BUYER TO VERIFY.

Fire Trace Suppression System
Chip Conveyor
With Edge Patriot 338 12’ Automatic Barloader
Mistbuster-850 Mist Filtration System
MP-Systems 4-Port 1,000 PSI High Pressure system

Loading...
Loading...
Loading...
Loading...