Hyundai-Wia HS5000i Horizontal Machining Center w/ 6 Position Pallet Pool

CAPACITY:
X axis travel 850mm (33.5”)
Y axis travel 700mm (27.6”)
Z axis travel 750mm (29.5”)
Pallet size 500mm x 500mm (19.7" x 19.7")
Number of pallets 2
Allowable load 500kg (1,102 pounds)
Maximum Part Swing (Diameter x Height) Ø 780mm (30.7”) x H980mm (38.6”)
Indexing 1 degree
Pallet Index Type (25) M16
Pallet Changing Method Direct Turn
Pallet Change Time 12 seconds

SPINDLE:
Table center to spindle nose 50 - 750mm (2” – 29.5”)
Table top to spindle center 150mm – 900mm (5.9” – 35.4”)
Spindle taper BCV #40
Pull Stud (Retention Knob) 45°
Spindle speed range 0 - 12,000 RPM
A.C. spindle motor (30min) 25kW (34 HP)
Spindle torque (30 min) 167N.m (123.1 lbs.ft)

AUTOMATIC TOOL CHANGER:
Number of Tools 60 (80 / 120 opt)
Tool Shank BCV #40
Max. Tool Dia. 75mm (3.0")
with empty adjacent pockets 140mm (5.5")
Max. Tool Length 450mm (17.7")
Max. Tool Weight 8kg (17.6 lbs.)
Tool change time (tool to tool) 1.1seconds
Tool change time (chip to chip) 3.5 seconds.

MOTION:
X, Y and Z axis rapid traverse rate 50m/min (1,968 IPM)
Cutting Feed 1mm~40,000mm/min (.04~1,574 IPM)
Least command increment .001mm (.0001")
Ball Screw Size (X, Y, Z axis) 40mm (1.57”)

GENERAL:
Machine Height 3,097mm (121.9 inches)
Floor Space (L) with chip conveyor & tank 4,089mm (161 inches)
Floor Space (W) with coolant tank 5,338mm (210.2 inches)
Approximate machine weight 15,000kg (33.069 lbs.)
Power required 40 kVA / 157 amp @ 220V
Voltage required 205 - 235 Volts / 3 Phase

Specifications are subject to change for improvement without notice.