New
Hyundai-Wia KF6700II 12K RPM 25" Z Vertical Machining Center
Vertical Machining Centers
The KF6700II Series Vertical Machining Center, designed by Hyundai WIA with years of expertise and using the very latest technology, maximizes productivity while maintaining rigidity and accuracy.
| SPINDLE TAPER | CAT40 (BIG PLUS) |
| X Travel | 51.2" |
| Y Travel | 26.4" |
| Z Travel | 25" |
| TABLE (L) | 59" |
| TABLE (W) | 26.4" |
| SPINDLE SPEED | 12,000 RPM |
| SPINDLE HP | 25 hp |
| MAGAZINE CAPACITY | 30 |
| Control | CNC (FANUC) |
SPECIFICATIONS
TRAVEL:
X / Y / Z axis travel 51.2” / 26.4" / 25.0"
Table top to spindle nose 5.9” ~ 30.9”
Column to spindle center 27.2”
TABLE:
Table size 59.1" x 26.4"
Allowable load 2,866 lbs
Table T slot spacing x width (5) x 4.92" x 0.71”
SPINDLE:
Spindle Speed 12,000 rpm
Spindle Taper BCV # 40
Pull Stud (Retention Knob) 45°
A.C. spindle motor (S3 15%) 24.8 HP
Spindle torque (30 min) 87 lbf.ft
AUTOMATIC TOOL CHANGER:
Number of Tools 30
Tool Shank BCV # 40
Max. Tool Dia. Ø3.1"
with empty adjacent pockets Ø4.9"
Max. Tool Length 11.8"
Max. Tool Weight 17.6 lbs
Tool change time (tool to tool) 1.3 sec
Tool change time (chip to chip) 3.5 sec
MOTION:
X / Y / Z axis rapid traverse rate 1,417 / 1,417 / 1,181 IPM
[1,645 / 1,654 / 1,654 IPM _Opt.]
Max. Cutting Feed 374 IPM
Least command increment .0001"
COOLANT and HYDRAULIC SYSTEM:
Coolant tank capacity 96.4 gal
Hydraulic tank capacity and required oil (Booster Cylinder)
Lubrication tank capacity and required oil 1.1 gal / G68
GENERAL:
Machine Height 1325.8"
Floor Space (L) with side chip conveyor & tank 173.7"
Floor Space (W) with control panel 105.9"
Machine weight 16,755 lbs
Power required 24.2 kVA / 64 amp @ 220V
Voltage required 205 - 235 Volts / 3 Phase
Specifications are subject to change for improvement without notice.
Hyundai Wia Fanuc - Smart Plus Control
Powerful 24.8 HP (18.5 kW) spindle motor (S3 15%)
Max. 12,000 RPM Direct Driven Spindle [15,000 RPM _Opt.]
59.1” x 26.4” (1,500 x 670mm) Table Size
2,866 lbs (1,300 kg) Load Capacity
Spindle Oil chiller system [8K _ Opt.]
BCV # 40 taper [HSK tool holder_Opt.]
Fast 1,417 IPM (36m/min) X, Y and 1,181 IPM (30m/min) Z axis rapid traverse
[1,654 IPM (42m/min) X, Y and 1,417 IPM (36m/min) Z axis_Opt.]
Large Linear Roller guide with roller bearings
ATC 30 Tools [40T_Opt.]
“Y” shape ribbed column structure
Metal plate coupling on all axes
Embed operating panel
290 PSI through the spindle coolant
Remote Manual Pulse Generator
Spindle override 0% to 200% (10% Unit)
Massive Meehanite cast iron bed
Double Pre-Tensioned Ball screws
Rigid tapping
Program and data protection key switch
Slanted telescopic way covers
Chip Conveyor (38” discharge height)
Flood coolant with large separate coolant tank
3 color tower signal light
Full enclosure splash guard
15” Touch-type monitor